1. Introduction "Dr. Paul" DL Series Intelligent Lighting Power Saver, the use of advanced electronic sensor technology and electromagnetic surge of power for real-time monitoring and tracking, automatic smoothly adjust the voltage and current amplitude of the circuit, improved lighting circuit is not Load balancing brings additional power consumption and improve power factor, reduce lighting and lines operating temperature, so as to optimize power supply purposes. The intelligent products to ensure that lighting can work under normal conditions, to the output of one of the best lighting fixtures power, can reduce the over-voltage lighting caused by glare, so that the light emitted by the light softer, more uniform light distribution, but also greatly save energy, saving rate of 20-40% can be illuminated and mixed in circuit use, adaptability, continuous and stable work in a variety of harsh environments and complex grid load, while also effectively extend lamp life and reduce maintenance costs. 2, saving principle of mixed high and low voltage across China missing, so all kinds of lighting in the design, in order to meet its own can normally start in different situations and light, its design voltage is generally lower than the standard phase voltage 220V; and the power system for the convenience of power transmission tends to increase transmission voltage, resulting in Lighting actual operating voltage is high. This excess voltage lighting not only can not make work more efficiently, there are two negative effects: a waste of energy and shorten lamp life. For existing lighting circuit this fatal flaw, "Dr. Paul" DL Series Intelligent Lighting Power Saver mode electromagnetic induction input voltage power supply system to be optimized, using AC-AC direct conversion technology to adjust the voltage, voltage lighting load is lost Best lighting design voltage value, saving electricity, but also extend the life of the lamp, but also to ensure a threefold purpose lighting standard. According to the basic principle of Electrical P = U2 / R, the voltage applied to the lamp is set U, lighting impedance set value resistor R, then it consumes the power in the original voltage U0 of P0, after appropriate to reduce the voltage to U1, then P1 power consumption decreases with the square of the voltage. Its active saving rate is expressed as: ε% = 1- (U1 / U0) 2 × 100% to fluorescent tubes, in just enough time to start the rated voltage required to excite the fluorescence material, so that the lamp light. Within a preset time, intelligent system senses the lamp after the power has been fully played, automatically adjust the load voltage, lamp can be transferred to the power-saving mode, the Power Saver same time into automatic online detection state. According to a large number of experimental results show that the power supply voltage is reduced by 10% each, fluorescent illumination of only about 7% lower, while the human eye to light is logarithmic relationship: that is, when the light intensity is reduced by 10%, the human visual sense brightness only decreased by 1%, so a reasonable reduction faint illumination of the lamp input power generated by the human eye almost feel the change, but in the extended lamp life and reduce both maintenance costs has a positive meaning. 3. Advantages ● intelligent automatic control system; soft start / full pressure start: the user can choose different types of lamps or the total pressure starts soft start, to ensure lamps start correctly, and extend its life, its startup time can be tone. 2; high intelligence saving: Depending on the lighting and working conditions, saving rate of 20% -40%. 3; regulators, constant pressure: Saver dynamic tracking the input voltage and automatically adjust the power-saving gear, the lights work in constant pressure to ensure the normal operation of lamps to achieve maximum energy savings. 4; multi-layer protection: bypass with low current, low voltage bypass, overload (overcurrent) bypass, automatic bypass and fault alarm function, and these functions can be DIP switch by the user themselves "on / off "Select. 5; bypass system: energy-saving and bypass double loop. 6; manual / automatic control: bypass and power-saving level can realize manual and automatic adjustment, even Saver fault can guarantee the normal operation of power supply system. 7; automatic power-off memory recovery function: automatically restore all the settings before the power failure. 8; remote control interface: computers and remote automatic control RS-485 or RS-232 interface; can be used for remote control upgrades, and on-site computer modify the program. 9; a selection of features: multi-period surge function, automatic tracking control switch celestial time clock function, alarm function. 10 effectively extend the service life of electric light source 11; on the grid does not produce any harmonic pollution, optimize network, expanding off of capacitance. 12; effective filtration current fluctuations and the impact of reducing the reactive power loss, optimize network performance indicators and the lighting equipment. 13; reduce the lamp operating temperature, promote energy-saving air-conditioning, lamp life can be extended by 30%. ● investment in low-risk, high-return, a significant reduction in operating costs; a good cost performance, one hundred thousand hours of system life. 2; users payback cost energy-saving equipment in 6 to 12 months. 3; energy-saving equipment after recovery costs, create long-term profits, significant economic benefits. ● Easy installation and maintenance 1; can be installed directly on the power supply system line, no need to change lines, install, easy to adjust. 2; intelligent control, dynamic tracking, automatic power saving, no debugging, no hand operation and management. 3; the implementation of the optimization process and strict quality testing, safe and reliable operation, easy maintenance. 4; appearance, compact dimensions, does not affect the unity of the installation site layout. Applications: 1; for hotels, supermarkets, hospitals, banks, schools, exhibition halls, parking lots, playgrounds, shopping centers, office buildings, landscape, advertising light boxes, lights, factories, and other various types of energy-saving lighting load; 2 ; especially for metal halide lamps, high pressure sodium lamp, mercury lamps, energy saving lamps, incandescent, fluorescent and other lamps, better lighting effect for continuous operation at night; 3; suitable for inductive load and supply voltage-based long-term high in hybrid illumination system rated voltage. "Dr. Paul" DL Series Intelligent Lighting Power Saver, the latest microcomputer control electromagnetic voltage regulator technology, not only can greatly save electricity power units, but also extend the life of the lamp 2-3 times, thus saving a lot of maintenance costs and working hours. Open corporate expenses inherent in the space of a saving, further reducing operating costs, for the continuous development of enterprises laid a solid foundation for good ﹑. In order to enable enterprises to truly achieve energy saving purposes, the Company sincerely recommend your company to our "Dr. Paul" DL Series Intelligent Lighting Power Saver: The product has the following characteristics: 1; compact, easy operation, low maintenance costs. 2; easy to install, without changing the original lighting circuit, without changing the original power of time. 3; save electricity more than 20% (direct savings in electricity costs) 4; extend the life of fluorescent tubes 2-3 (significantly reduce lighting maintenance and replacement costs) 5; equipment life of up to more than 100,000 hours. 6; small investment, return fast (about 1 to 2 years)