1. Introduction, "Dr. Paul" DL Series Intelligent Lighting Power Saver, the use of advanced electromagnetic induction regulator and electronic technology, real-time monitoring and tracking power supply, automatic smoothly adjust the voltage and current magnitude of the circuit, improved lighting circuit is not load balancing brings additional power consumption and improve power factor, reduce the working temperature of the lamp and the line, so as to achieve the purpose of optimizing the power supply. The intelligent products to ensure that the lamp can operate under normal conditions, to the output of one of the best lighting fixtures power, can reduce the overvoltage caused by lighting glare, so that the light emitted by the light softer, more evenly distributed illumination, but also significantly save energy, saving rate of 20-40% can be illuminated and mixed used in the circuit, adaptable, able to work continuously and stably in a variety of harsh environments and complex grid load, while also effectively extend lamp life and reduce maintenance costs. 2 saving principle voltage level varies across China does not Qi, so all kinds of lighting design, in order to meet their own can normally start in different situations and light, its design voltage is generally lower than the standard phase voltage 220V; and power system for the convenience of delivery voltage power transmission tends to improve, resulting in lighting High voltage lamps actually work. These over-voltage lighting not only can not make work more efficiently, there are two negative effects: a waste of energy and shorten lamp life. For existing lighting circuit this fatal flaw, "Dr. Paul" DL Series Intelligent Lighting Power Saver mode electromagnetic induction input voltage power supply system to be optimized, using AC-AC direct conversion technology to adjust the voltage, voltage lighting load is lost Best lighting design voltage value, saving electricity, and extend lamp life, but also to ensure a triple purpose lighting standard. According to the basic principles of electrical P = U2 / R, the voltage applied to the lamp is set U, lighting impedance set fixed value resistor R, then it is consumed at the original voltage U0 power P0, U1 is appropriate to reduce the voltage to, then P1 power consumption decreases with the square of the voltage. Its active saving rate is expressed as: ε% = 1- (U1 / U0) 2 × 100% on fluorescent tubes, in need just enough to start the rated voltage excitation fluorescent material, so that the lamp light. Within a preset time, intelligent system senses the lamp after power has been completely played, which automatically adjust the load voltage, lamp can be transferred to the power saving mode, while Saver into the automatic line detection state. According to a large number of experimental results show that the power supply voltage is reduced by 10% each, fluorescent illumination only about 7 percent lower, while the human eye to light is logarithmic relationship: that is, when the light intensity is reduced by 10%, the human visual sense only brightness decreased by 1%, so a reasonable reduction faint illumination lamp input power generated by the human eye can hardly feel the change, but in the extended lamp life and reduce both maintenance costs have positive significance. 3. Advantages ● intelligent automatic control system; soft start / full pressure start: the user can choose different types of lamps soft start or full pressure start to ensure that the lamp can start properly and prolong its life, its startup time can be tune. 2; high intelligence saving: Depending on the lighting conditions and the saving rate up to 20% -40%. 3; regulators, constant pressure: Saver dynamic tracking the input voltage and automatically adjust the power-saving gear, the lights in a constant state of work in order to ensure the normal operation of the lamp, to achieve maximum energy savings. 4; multi-layer protection: bypass with low current, low voltage bypass, overload (overcurrent) bypass, automatic bypass and fault alarm function, and these functions by the user via DIP switches themselves "on / off "Select. 5; bypass system: energy-saving double bypass circuit. 6; manual / automatic control: bypass and power-saving level can be achieved manually and automatically adjust, even Saver fault can guarantee the normal operation of the lighting power supply system. 7; automatic power-off memory recovery function: automatically restore all the settings before the power failure. 8; remote control interface: computers and remote automatic control RS-485 or RS-232 interface; can be used to remotely control upgrades, and on-site computer to modify the program. 9; a selection features: multi-period surge function, automatic tracking celestial clock time function control switch, burglar alarm functions. 10 effectively extend the service life of 11 electric light; on the grid does not produce any harmonic pollution, optimize network to expand off of the capacitor. 12; effectively filter current fluctuations and the impact of reducing the reactive power loss, optimize power and lighting equipment of the performance indicators. 13; reduce the lamp operating temperature, promote energy-saving air-conditioning, lamp life can be extended by 30%. ● investment in low-risk, high-return, a significant reduction in operating costs; good cost performance, one hundred thousand hours of system life. 2; the user to recover investment costs of energy-saving equipment in 6 to 12 months. 3; later recovered energy-saving equipment costs, long-term profits and create significant economic benefits. ● Easy to install and maintain a; can be mounted directly on the power supply system line, no need to change lines, install, easy to adjust. 2; intelligent control, dynamic tracking, automatic power saving, no debugging, no hand operation and management. 3; to implement an optimized process and strict quality testing, safe and reliable operation, easy maintenance. 4; appearance, compact size, does not affect the unity of the installation site layout. Applications: 1; suitable for hotels, supermarkets, hospitals, banks, schools, exhibition halls, parking lots, playgrounds, shopping centers, office buildings, landscape, advertising light boxes, lights, factories, and other various types of energy-saving lighting load; 2 ; especially for metal halide lamps, high pressure sodium lamp, energy saving lamps, incandescent, fluorescent and other lamps, lighting equipment and better results for continuous operation at night; 3; mainly suitable for inductive load and long-term supply voltage higher than the rated voltage The hybrid illumination system. "Dr. Paul" DL Series Intelligent Lighting Power Saver, using the latest microcomputer control solenoid regulator technology, not only can significantly save electricity power units, but also extend the life of the lamp 2-3 times, thus saving a lot of maintenance costs and working hours. Opened expenses inherent in the enterprise in the space of a saving, further reducing operational costs, for the continuous development of enterprises laid a solid foundation for good ﹑. In order to enable enterprises to truly achieve energy saving purposes, the company sincerely recommend your company to our "Dr. Paul" DL Series Intelligent Lighting Power Saver: the product has the following characteristics: 1; compact, easy operation, low maintenance costs. 2; easy to install, without changing the original lighting circuits, without changing the original power of time. 3; more than 20% less electricity (direct savings in electricity costs) 4; 2-3 to extend the life of the light pipe (significantly reduce lighting maintenance and replacement costs) 5; equipment life of up to 100,000 hours. 6; small investment, return fast (about 1 to 2 years)